Panasonic VDR-M53PP Operating Instructions Manual

Also see for VDR-M75PP: Operating instructions Service manual

Contents

Panasonic VDR-M53PP Operating Instructions Manual Manual pdf 158 page image

During recordingPressing the REC button Is input image copy-guarded?will not start recording. Copy-guarded image cannot be recorded on this DVD Video 75Camera.Recording starts but Is disc scratched or do dirt or fingerprints adhere to it?stops immediately. Clean the disc. If there is still no improvement, replace the disc. 30If you turn this DVD Video Camera on for many hours in a hightemperature location, this DVD Video Camera may automaticallystop recording for the protection of the lens in the laser pickupassembly. In this case, follow the messages on the display of thisDVD Video Camera.To start recording again, turn this DVD Video Camera off and leaveit for a while.Is some other AV device directly connected to the AV input/outputack of this DVD Video Camera?If the AV device is connected via several other devices, such as AVselector, the video signal may be transmitted incorrectly. In such a 75case, reduce the number of devices through which the video signalis transmitted, or connect AV device directly.Are you attempting to record an image from a video game or PC?From some video games or PCs, images cannot be recorded on this 75DVD Video Camera.LCD screen is hard to Has brightness of LCD screen been adjusted? 91see. Stop recording and adjust the brightness.Is the DVD Video Camera being used outdoors?Use the viewfinder. When using LCD monitor, adjust its angle so that 38LCD screen is not exposed to direct sunlight.Focus is not correct. Is it difficult to use auto focus with your subject? 65Focus manually.Does "MF" appear?The DVD Video Camera is set to manual focus. Focus the subject 64manually, or release manual focus.Is the diopter control correctly adjusted if you are using theviewfinder as a monitor? 37Adjust the diopter control.In cases other than the above, set the power switch to "OFF", andthen set it to" _ ", " I_1 "or" I_ "again. 50Some vibrations are felt These vibrations or sound are caused by disc drive: This does notor slight sound is heard indicate a fault.from mechanism.158