Panasonic VARICAM LT Operating Manual

Also see for VARICAM LT: Operating guide White paper Operating guide

Contents

Panasonic VARICAM LT Operating Manual Manual pdf 30 page image

– 30 –Chapter 3 Preparation — Mounting and adjusting the lensPL lensThe PL lens can be used by replacing the lens mount.Replacing the lens mountFig. 1Fig. 2 Fig. 3ContactConnectorPositioning holePositioning pinTightening holeTightening holeMountingscrewMountingscrewMounting screw(Round hole, 2 locations)Tightening hole(4 mm hexagon hole, 2 locations)EF mountMount fixing ringPL lens mount moduleMount fixing ring1 Loosen the two mounting screws on the mount fixing ring. (Fig. 1)f Use the 1.5 mm Allen wrench.f The position of the mounting screw may not match with the illustration depending on the fixing condition of the mount.2 Turn the mount fixing ring to remove the EF mount. (Fig. 1)f If the fixing ring is stiff and does not turn, insert an Allen wrench into the tightening hole on the fixing ring and turn the fixing ring.3 Attach the PL lens mount module. (Fig. 2)f Align the positioning pin and the positioning hole. Also align the connector on the camera with the contact on the mount.4 Turn the mount fixing ring to fix. (Fig. 3)5 Fix the two mounting screws. (Fig. 1)