145UF-9000APR 2006Ver. 3.0DP-180/1904.10.3. Error Message Appears on the PC4.10.4. Error Message Appears on the Unit4.10.5. System Error (CD Drive Related Error During Installation)Error Message Possible Solution(s)Network Print DLL Error. • Check if the Panasonic Device is turned "On", and the 10Base-T/is 100Base-TX cable properly connected.• Printer Properties may be incorrectly configured. (i.e. Printer Port)Network Port is Busy. • The Panasonic Device may be processing someonefs print job,please wait, and try again later.• The Panasonic Device is either Transmitting or Receiving an email.Cannot print because an error isfound in the current printersetting.• Verify and specify the paper size, or orientation to coincide with theapplication and the printer driver settings.Error Message• The available Sort Memory in the Panasonic Device may not beenough to complete the print job.Either install an optional Sort Memory, or change theresolution to 300 dpi in the Printer Driver Properties dialog box.• The print settings may not be matched for the system.Change the printing settings in the Printer Driver Propertiesdialog box.i.e. Multi-sized printing.Cannot complete print jobImage memory overflowCannot printSystem errorCannot completeConfirm print condition• Change the resolution to 300 dpi in the Printer Driver propertiesdialog box.Problem Possible Solution(s)Cannot read the drive. • Insert the CD into the drive and click “Retry”.
