Panasonic Toughbook CF-W5LCEZZBM Reference Manual

Also see for CF-W5 series: Supplementary guide Supplementary instructions Operating instructions Operating instructions User manual

Panasonic Toughbook CF-W5LCEZZBM Reference Manual Manual pdf 60 page image

60External DisplayYou can switch the output destination to an external display.Connect the external display to the external display port (A).NOTEz After resuming from hibernation or restarting the computer, the output destination may not be the same as the oneselected in the previous status.z Do not connect or remove the external display during standby or hibernation.z It may take some time to switch between displays depending on the displays used.z When you use high resolution displays, the display color, resolution or refresh rate may be changed, switching to[Notebook] in [Intel(R)GMA Driver for Mobile].We recommend you to switch the output destination by pressing Fn+F3.z When you change the output destination after Windows starts up, do not press any key until switching is complete.z You cannot use the simultaneous display until Windows starts up.z Display switching by pressing Fn+F3 may not work when you use the Fast User Switching function to switch the user.In this case, log off all users and restart the computer.z Simultaneous display and display switching do not work when [Command Prompt] screen is set to “Full Screen”.z When you use an external display or extended desktop, click [Display Settings] and set a suitable number of colors,resolution, or refresh rate for each display.Depending on the settings, some external displays may be distorted or displayed incorrectly. In this case, check therefresh rate setting.z When you use the simultaneous display, DVD-Video, MPEG files and other motion image files may not be played backsmoothly.z Carefully read the instruction manual of the external display.z When connecting an external display that does not conform to the Plug & Play standards, select the display driveraccordingly in the following menu, or use the driver disk supplied with the external display.[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Monitor] - [Properties] -[Driver] - [Update Driver]z When you use the external display with 2048 x 1536 dot resolution, use the display which is supported 60 Hz refreshrate. If not, some external displays may be distorted. For further information, refer to the instruction manual of theexternal display.z If a picture is not displayed normally, lower the level of [Hardware acceleration] in the following menu.[start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings] - [Advanced] - [Troubleshoot]z If you connect an external display via the mini port replicator (CF-VEBU05AU), you cannot use the external displayport on the computer.