43WinDVDB Confirm that the check mark is added to [Use Hardware Decode Acceleration]. Do not add a check mark in [UseHardware Color Acceleration].z The display may flicker, depending on the disk. In this case, delete the check mark for [Use Hardware Decode Accelera-tion] using step B described above.z In the Extended Desktop or simultaneous (internal/external) display mode, there are times when images or motion videoare not displayed correctly. The playback screen appears to be blurred, white, and jumpyz Right-click on the WinDVD screen, and click [Setup] - [Video] to display the [Color Preset]setting screen, and then set [Color Preset] to [Custom].To change color settings in WinDVD, click on the WinDVD control panel, click [Color],and set [Brightness], [Contrast], and [Color] on the sub-panel. When battery operation time has become short:z Set [Deinterlace] to [Auto]. If this is set to [Advanced], the CPU usage rate increases, and more battery power is con-sumed. (Click on the WinDVD control panel, then click [Display] to show the sub-panel for changing the [Deinterlace]setting.) Changing power settingsz While a video is playing on WinDVD, the [Power schemes] in [Power Options Properties] switch to [Intervideo WinDVD].This will return to the original setting when the playback is stopped. If you have uninstalled WinDVD accidentally:z Reinstall it by following the steps below.A Log on to Windows as an administrator.B Set the Product Recovery DVD-ROM in the CD/DVD drive.C Input [d:\windvd\setup.exe]*1 in [start] - [Run] and click [OK].Follow the on-screen instructions and install WinDVD.z When the [License Agreement] screen *2 appears, click [Yes] if you agree to the terms.*1 “d:” is the drive letter of the CD/DVD drive. Change this to match the drive letter on your own computer.*2 Refer to “LIMITED USE LICENSE AGREEMENT” in the Operating Instructions for this computer.