Panasonic Toughbook CF-52ELNBD2M Reference Manual

Also see for CF-52 Series: Supplementary guide Supplementary guide Supplementary instructions Getting started guide Supplementary instructions

Panasonic Toughbook CF-52ELNBD2M Reference Manual Manual pdf 46 page image

46USB DevicesPreparationAttach the device for the media containing the card driver (e.g., CD-ROM). Equipment connected to the multimediapocket cannot be recognized if connected after the USB device driver installation screen appears. To connect the USB device1 Open the cover and connect the USB device to one of the USB ports(A) on the computer.For further information, refer to the instruction manual of the USB device. To remove the USB device1 Disable the USB device.A Click on the notification area and select the USB device, then click [OK].z This step is not necessary when;• Removing the device after turning off the computer.• is not displayed.• The device does not appear in the list in step A.2 Remove the USB device.NOTEz You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction man-ual of the USB device.z You may need to install the driver again when connecting the device to another port.z When a USB device is connected, sleep and hibernation may not function normally. If the computer does not start upnormally, remove the USB device and restart the computer.z If the computer enters sleep while a USB keyboard or mouse is connected, touching the USB keyboard keys or mousewill resume the computer.z When the USB device is removed and then inserted while the computer is on, may appear in the Device Managerand the device may not be correctly recognized. In this case, remove and connect the device again, or restart the com-puter.z When a USB device is connected, power consumption increases. Remove the USB device when it is not in use, espe-cially when operating by battery power.Connecting/Removing USB Devices