9 Getting Started2 Read the LIMITED USE LICENSE AGREEMENT ( page 26)Before removing the seal covering the power switch, read the LIMITED USELICENSE AGREEMENT.3 Insert the battery pack1 Turn your computer over, and slide the latches inward.2 Lift open the cover holding both sides and remove the cover.3 Insert the battery pack into the computer with the label-side up.First-time OperationRead the steps below to help you learn what parts are included, and to gain an understandingof some basic computer-related operations.1 Confirm the inclusion of all partsMake sure the parts shown in the figure have been supplied. If any of these items aremissing or is not working properly, contact Panasonic Technical Support.Label-side upModel No : CF-AA1653AC Adaptor ............ 1Model No : CF-VZSU18AC Cord .................. 1 Battery Pack........... 1LatchCAUTIONBe sure the battery pack is properly connected to the connector.Do not touch the terminals on the battery pack and the computer. The batterypack may no longer function properly if the contacts are dirty or damaged.Also, the computer may not operate properly.( Page 28)Cover4 Put the cover back into place holding both sides.5 Slide the latches outward.CAUTIONIf the cover is not attached properly, the battery may fall out while the com-puter is being carried.When attaching the cover, be careful not to get your fingers and the tabcaught in the cover.2345511Operating Instructions (This book) ..................................................... 1Windows® Book .............................................................................. 1Product Recovery CD-ROM ........................................................... 2 ** Dual OS : 4( “Touchscreen”)Soft Cloth .................................. 1 Stylus ..................................... 1Strap .......................................... 1Modem Telephone Cable .......... 1