Panasonic Toughbook CF-28 Series Operating Instructions Manual

Also see for Toughbook CF-28 Series: Supplementary instructions Supplementary instructions Service manual Simplified service manual Service manual

Contents

Panasonic Toughbook CF-28 Series Operating Instructions Manual Manual pdf 10 page image

10 Getting Started6 Turn your computer onRotate the power switch clockwise and hold it for approximately one second until thepower indicator turns on before releasing it.Power SwitchDo not rotate the power switch repeatedly.Once the computer is powered off, you must wait at least ten seconds beforepowering it on again.4 Connect your computer to a power outletBe sure the AC adaptor is connected until completing Step 8 on page 11.When closing the cover, first insert the top of the cover.Handling the AC adaptorDo not twist or pull the AC power cord forcefully. Doing so may damage theconnections.Use only the specified AC adaptor with your computer. Using an AC adaptorother than the one supplied might damage the battery and/or the computer.When the DC plug is not connected to the computer, disconnect the AC cordfrom your AC wall outlet.Problems such as sudden voltage drops may arise during periods of thunderand lightning. Since this could adversely affect your computer, an uninterruptiblepower source (UPS) is highly recommended unless the battery pack is installed.Power IndicatorFirst-time OperationCAUTIONCAUTION5 Open the display1 Pull the carrying handle forward.2 Lift up the latch.3 Lift open the display.113When using the computer for the first time, do not connect any peripheral deviceexcept the battery pack and AC adaptor to the computer.NOTE23 2