Panasonic ToughBook CF-50 Series Operating Instructions Manual

Also see for Touchbook CF-50 Series: Operating instructions Operating instructions Manual Reference manual Operating instructions

Panasonic ToughBook CF-50 Series Operating Instructions Manual Manual pdf 26 page image

26 TroubleshootingReinstalling SoftwareBefore ReinstallationPreparingThe Product Recovery DVD-ROM (included).ImportantBefore the reinstallation procedure, remove all peripherals.Be sure the AC adaptor is connected until the reinstallation procedure is completed.Even if reinstallation is executed, the number of times that the DVD video region code can be set will not be returned tothe state set at the time of factory shipment.ReinstallingWhen reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical datathat is on your hard disk before running the reinstallation procedure.The reinstallation procedure will return the computer to its original condition.• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure.1 Turn on the computer, and press F2 while [Panasonic]boot screen is displayed.The Setup Utility will start up.If the password has been set, enter the Supervisor Pass-word.2 Write down all of the contents of the Setup Utility andthen press F9 .At the confirmation message, select [Yes] and pressEnter .3 Select [Boot] menu, then select [CD/DVD Drive]* andpress F6 until [CD/DVD Drive]* is at the top of [Boot]menu.* CF-50F******: [CD Drive]4 Place Product Recovery DVD-ROM into the CD drive.5 Press F10 .At the confirmation message, select [Yes] and pressEnter . The computer will restart, and this screen shouldappear.6 Press 1 to execute [1. [Recovery]].(You can cancel this operation by pressing 0 .)The License Agreement screen should appear.7 Press 1 to select [1. Yes, I agree to the provisions aboveand wish to continue!].This screen should appear.8 Make a selection from the menu.When selecting [2], enter the basic partition size for theoperating system installation and press Enter .(The data partition size is the remainder after subtract-ing the basic partition size.)To select [3], the initial partition size must be 6 GB ormore of the hard disk size. Reinstallation cannot be per-formed with a small partition size.---------------------------------------------------------------------Select a number---------------------------------------------------------------------Reinstalling : Windows(R) 2000 Professional1. Reinstall Windows to the whole HDD to factory default.2. Make two partitions, for the operating system and data. And reinstallWindows to the operating system partition.(All existing partitions on HDD will be lost.)3. Reinstall Windows to the first partition.0. Cancel---------------------------------------------------------------------Windows 2000Windows XP---------------------------------------------------------------------Select a number---------------------------------------------------------------------Reinstalling : Windows(R) XP Professional1. Reinstall Windows to the whole HDD to factory default.2. Make two partitions, for the operating system and data. And reinstallWindows to the operating system partition.(All existing partitions on HDD will be lost.)3. Reinstall Windows to the first partition.0. Cancel---------------------------------------------------------------------