Panasonic TY-TP58P10S Service Manual

Also see for TY-TP42P10S - Touch-screen - Wired: Operating instructions Operating instructions

Contents

Panasonic TY-TP58P10S Service Manual Manual pdf 45 page image

4511. Press "Initialize".• Both red and blue wave shapes match with each other. Thered wave shape is set during start-up and initialization withbasic light level. The blue wave shape shows the operationin progress.• Adjustment from here can be made with this wave shapecondition.6.6. Adjust PEAKPOSI (Corner)• Purpose for adjustment : Make Touch Panel recognize thecorners bottom left and right.1. Display Parameter and select "Camera Scope" tab.2. Touch the corner bottom right of PDP screen displayarea.• Touch with a bar such as Touch Pen to indicate thecorrect position. The blue wave shape at the cornerbottom right falls down.• If lpeakpos value is changed, the yellow line in thereflection plate image moves to left and right. Adjustlpeakpos and match the position to the dent of the bluewave shape.• As the reflection plate looks black at the touched point,matching yellow line is better to adjust correctly.3. Touch the corner bottom left of PDP screen display area.• Touch with a bar such as Touch Pen to indicate thecorrect position. The blue wave shape at the cornerbottom left falls down.• If rpeakpos value is changed, the yellow line in thereflection plate image moves to left and right. Adjustrpeakpos and match the position to the dent of the bluewave shape.• As the reflection plate looks black at the touched point,matching yellow line is better to adjust correctly.4. Press "Write to ROM" to write the adjustment result.