3Getting StartedThank you for your purchase of the Touch Panel.To use the product connecting with a Windows XP or Vista computer, the touch panel driver mustbe installed.Install the driver according to this manual.For Windows7, the driver does not need to be installed.The touch panel driver enables the output data from the touch panel converted to the protocolcompatible with the Microsoft serial mouse to provide the application program a user interfaceequivalent to a mouse. Therefore the existing application can be operated with the touch panel andtouch panel application developments can be carried out using a mouse.The operation settings for the touch panel can be changed using the setting program.This manual is intended to the users familiar with Microsoft Windows operations.For details on the Windows operations, please refer to your Windows manual etc.Note1. Any part or all of this manual or driver software may not be copied without the prior consent ofPanasonic Corporation.2. The contents of this manual or driver software may be changed for improvement withoutnotice.3. Panasonic Corporation do not take any responsibilities for any failure of device, datacorruption, or damage caused by these failures due to improper use of this driver software bythe customer or a third party unless the liability is imposed by law.4. The company and product names mentioned in this manual are the trademarks or registeredtrademarks of their respective companies.5. Every possible care has been taken to prepare this manual however if you ¿nd any mistake oromission, please contact the address stated at the end of this document.6. We will exchange any manual with the pages out of order or missing.Microsoft, Windows XP, and Windows Vista are registered trademarks of Microsoft Corporationin the USA and other countries.Other company and product names mentioned in this manual are the trademarks or registeredtrademarks of their respective owners.™ and ® marks are not indicated in this manual.