Panasonic TY-TP42P30K Installation Manual (driver)

Also see for TY-TP42P30K (): Operating instructions Brochure & specs Operating instructions

Contents

Panasonic TY-TP42P30K Installation Manual (driver) Manual pdf 16 page image

163) Click CorrectionSets the click correction method. The default setting is "Normal".The click area may be narrow and dif¿cult to click by touching depending on the application beingused. In this case, set Click Correction to "Special" so that the button down and button up positionscan be consistent under certain conditions and the click will be easily recognized.Normal: Use this setting when handwriting characters etc. Usually use this setting.Special: Use this setting for operations in a small click area made by HTML etc.4) Double Click CorrectionSets the double click correction method. The default setting is "Normal".Normal: Use this setting when handwriting characters etc. Usually use this setting.Special: Use this setting to use double clicking mainly.5) Correction TimeSets the time to recognize the Click Correction and Double Click Correction. The setting can bemade in 0.2 second increment from 0.2 to 1.0 second. The default setting is "0.4 second".To change this setting, set the Double-click speed to "Slow" (move the slide bar to the leftmost) inMouse Properties of the Control Panel.Click : Sets the time from button down to button up.Double click: Sets the time from the first touch to the second touch and lets the program torecognize as a double click when the second touch is performed within the settime.6) Correction AreaSets the effective area for clicking and double clicking. Setting to "Wide" makes the area wide and"Narrow" makes it narrow. The default setting is "Normal".Click : Sets the effective area from button down to button up.Double click: Even when the ¿rst touch (click) and the second touch (click) are slightly apart, theoperations are recognized as a double click.