• After preparing the ends of the speaker cablesfor the right and left speakers, connect themas shown in the illustration.• The red cable is for the (+) polarity and theblack cable is for the (-) polarity. Do notconnect the cables to the wrong polarities.• If fixing the plasma television to the wall-hanging bracket, first connect the speakercables to the plasma television.6. Connect the speakercables.Preparing the ends of thespeaker cablesRemove whiletwisting1. Press down on the lever.2. Insert the cable.3. Release the lever.1. Push down the lever.3. Return the lever to itsnormal position.2. Insertthe cable.InstallationInformation on Disposal for Users of Waste Electrical & Electronic Equipment (private households)This symbol on the products and/or accompanying documents means that used electrical and electronicproducts should not be mixed with general household waste.For proper treatment, recovery and recycling, please take these products to designated collection points, wherethey will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return yourproducts to your local retailer upon the purchase of an equivalent new product.Disposing of this product correctly will help to save valuable resources and prevent any potential negative effectson human health and the environment which could otherwise arise from inappropriate waste handling. Pleasecontact your local authority for further details of your nearest designated collection point.Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.For business users in the European UnionIf you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.Information on Disposal in other Countries outside the European UnionThis symbol is only valid in the European Union.If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.• To attach to each speaker, use the fixingscrews. To attach to the plasma TV, use thebracket mounting screws.5. Attach C bracketsBracket mounting screwsFix screwsMounting C bracketRear of speaker Rear of Plasma TelevisionBlackRedBlackRed1. Press down on the lever.2. Insert the cable.3. Release the lever.4 English