Panasonic TY-SP65P11WK Installation Instructions Manual

Also see for TY-SP65P11WK: Service manual Specifications Installation instructions

Contents

Panasonic TY-SP65P11WK Installation Instructions Manual Manual pdf 2 page image

2 EnglishLeftRightMounting A brackets ................4 Mounting B brackets(right) ......................................................... 2(left) ........................................................... 2Bracket mounting screws......................................... 16Sponges ............................ 2 Speaker cables (25 cm) .... 2Safety PrecautionsAccessories1. If connecting to an external amplifier that exceeds therated input for the speakers, keep the amplifier volumesuitably low to protect the speakers from damage. If anyproblems occur with speaker operation, disconnect themains lead of the amplifier and consult a qualified servicetechnician.2. Do not place the speakers in the following places:• Areas that are exposed to direct sunlight• Near heaters or other heat sources• Areas subject to high humidity3. This set is equipped with magnetic resistant speakers.However be careful not to place it near a CRT or PDP TVas it may cause colour patches.4. To clean the speakers, wipe them with a soft cloth. If theyare extremely dirty, wipe them with a cloth that has beensoaked in a small amount of household detergent, andthen wipe them dry with a separate cloth.• Do not use solvents such as alcohol or thinner.• If using chemically-treated cloths, follow the instructionssupplied with the cloth packaging.Notes on useCAUTIONAfter installing the speakers, do not attempt to move the display by lifting the speakers.• The mounting brackets may be damaged, and personal injury may result.Do not suspend the speakers.• Personal injury may result if the speakers fall off. Take particular care to ensure the safety of children.These speakers are designed to be used with the Plasma Display only.• If connecting them to a different amplifier, make sure that the maximum input to the speakers is within their rated level(10 W). If the rated input level is exceeded, fire may result.Make sure that all screws are tightened securely during installation.• Ensure that the installation is carried out correctly to prevent the speakers from becoming detached, and possiblycausing possible personal injury.