Panasonic TX-PF42G30 Service Manual

Also see for TX-P42G30E: Operating instructions Operating instructions

Panasonic TX-PF42G30 Service Manual Manual pdf 13 page image

136.4. Hotel mode1. PurposeRestrict a function for hotels.2. Access command to the Hotel mode setup menuIn order to display the Hotel mode setup menu:While pressing [VOLUME (-)] button of the main unit,press [AV] button of the remote control three times within2 seconds.Then, the Hotel mode setup menu is displayed.3. To exit the Hotel mode setup menuDisconnect AC power cord from wall outlet.4. Explain the Hotel mode setup menuItem FunctionHotel Mode Select hotel mode On/OffInitial INPUT Select input signal modes.Set the input, when each time power is switchedon.Selection :Off/Analogue/DVB-C/DVB-T/AV1/AV2/COMPO-NENT/HDMI1/HDMI2/HDMI3/HDMI4• Off: give priority to a last memory. However,Euro model is compulsorily set to TV.• AVnS/AVnC: only Euro model selectableInitial POS Select programme number.Selection :Off/0 to 99• Off: give priority to a last memoryInitial VOL Level Adjust the volume when each time power isswitched on.Selection/Range :Off/0 to 100• Off: give priority to a last memoryMaximum VOLLevelAdjust maximum volume.Range :0 to 100Button Lock Select local key conditions.Selection :Off/SETUP/MENU/ALL• Off: altogether valid• SETUP: only F-key is invalid(Tuning guide (menu) can not be selected.)• MENU: only F-key is invalid(only Volume/Mute can be selected.)• ALL: altogether invalid.Remote Lock Select remote control key conditions.Selection :Off/SETUP/MENU• Off: altogether valid• SETUP: only Setup menu is invalid• MENU: Picture/Sound/Setup menu are invalidPrivate Information Select private information for VIERA Cast is Keepor Reset if Hotel mode is set to [On] when TVpower on.Selection :Keep/Reset• Keep: private information for VIERA Cast iskeep• Reset: private information for VIERA Cast isreset