Data Copy from SD Card to TV set1. Turn on the TV set.2. Insert SD card with Data to SD slot.On-screen Display will be appeared according to the Data folder automatically.3. Input a following password for (a) or (b) by using remote control.(a) For Board replacement: 2771(b) For Hotel: 4851Data will be copied from SD card to TV set.4. After the completion of copying from SD card, remove SD card from TV set.(a) For Board replacement: Data will be deleted after copying (Limited one copy).(b) For Hotel: Data will not be deleted and can be used for other TVs.5. Turn off the TV set.Note:1. Depending on the failure of boards, function of Data for board replacement does not work.2. This function can be effective among the same model numbers.20Input PasswordPerformingInput Password2771 or 4851PerformingCompletionPerformingData Copy(Board replacement )Input password -----Data Copy(Board replacement )Copy SD card to TVPlease wait for a whilePlease do not remove the SD card WRITINGData Copy(Board replacement )Data copy has been successfulPlease remove SD card FINISH