Data Copy from TV set to SD Card1. Turn on the TV set.2. Insert SD card with a startup file (pwd file) to SD slot.On-screen Display will be appeared according to the startup file automatically.3. Input a following password for (a) or (b) by using remote control.(a) For Board replacement: 2770(b) For Hotel: 4850Data will be copied from TV set to SD card.It takes around 2 to 6 minutes maximum for copying.4. After the completion of copying to SD card, remove SD card from TV set.5. Turn off the TV set.Note:Following new folder will be created in SD card for data from TV set.(a) For Board replacement: user_setup(b) For Hotel: hotel19Data copy(Board replacement) or (Hotel)Input Password2770 or 4850PerformingCompletionPerformingData Copy(Board replacement )Input password -----Data Copy(Board replacement )Input password -----Data Copy(Board replacement )Copy TV to SD cardPlease wait for a whilePlease do not remove the SD card GETTINGData Copy(Board replacement )Data copy has been successfulPlease remove SD card FINISH