Panasonic TX-40DSW404 Operating Instructions Manual

Contents

Panasonic TX-40DSW404 Operating Instructions Manual Manual pdf 22 page image

English22Child LockYou can lock specific channels / AV input terminals torestrict access to them.When the locked channel / input is selected, a messageappears. Enter the PIN number to watch.● For details, refer to [eHELP] (Functions > Child Lock).1 Display the menu and select [Setup]Setupselectaccess2 Select [Child Lock]selectaccess1 Enter the PIN number (4 digits)● Enter the PIN number twice at first setting.● Make a note of the PIN number in case you forgetit.● “0000” may be stored as the default PIN numberdepending on the country you select.2 Select [Child Lock List] and set the channel / input tobe locked101 BBC 1 Wales7 BBC THREE14 E4CVCR1 BBC1*****2HDMI1 AVChild Lock List - TV and AV Sorting 123...Name InputDVB-CDVB-TDVB-TAnalogueAnalogueAnalogueExternalTypeFree TVFree TVFree TVAnalogueAnalogueAnalogueLockselectlock / unlock: Appears when the channel / input is locked● To lock all(green)● To cancel all locks(yellow)● To sort channel names in alphabetical order(red)● To jump to the head of the next channel / input group(blue)Watching ExternalInputsConnect the external equipment (VCR, DVD, etc.) andyou can watch through the input.● For details, refer to [eHELP] (Watching > Externalequipment).1 Display the input selection menu2 Select the input mode connected tothe equipmentselectwatch● TV receives input signals automatically connectingwith SCART when playback starts.• Input signals are automatically identified by theSCART (pin 8) terminal.• This function is also available for HDMIconnections when [VIERA Link] is set to [On].• When input mode is not switched automatically,perform as above or check the setup of theequipment.● You can also select the input pressing the AV button.Press repeatedly until the desired input is selected.● You can select [COMPONENT] and [VIDEO] in [AV2].Operating the equipment with TV’sremote controlYou can operate the content in Media Player / mediaserver, recording functions or the connected equipmentwith the following buttons of this TV’s remote control.■ How to change the codeEach Panasonic product has its own remote controlcode. Change the code according to the product foroperation.Press and hold Standby On / Off switchduring the following operations