Panasonic TX-32E302B Operating Instructions Manual

Contents

Panasonic TX-32E302B Operating Instructions Manual Manual pdf 14 page image

English - 13 -TV Menu ContentsPicture Menu ContentsModeYou can change the picture mode to suit your preference or requirements. Picturemode can be set to one of these options: Cinema, Game(optional), Sports, Dynamicand Natural.Contrast Adjusts the light and dark values on the screen.Brightness Adjusts the brightness values on the screen.Sharpness Sets the sharpness value for the objects displayed on the screen.Colour Sets the colour value, adjusting the colors.Energy SavingFor setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,Screen Off or Off.Note: Available options may differ depending on the selected Mode.Backlight This setting controls the backlight level. The backlight function will be inactive if theEnergy Saving is set to an option other then Custom.Advanced SettingsDynamic Contrast You can change the dynamic contrast ratio to desired value.Noise Reduction If the signal is weak and the picture is noisy, use the Noise Reduction setting toreduce the amount of noise.Colour Temp Sets the desired colour temperature value. Cool, Normal, Warm and Customoptions are available.White Point If the Colour Temp option is set as Custom, this setting will be available. Increasethe ‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.Picture Zoom Sets the desired image size format.Film ModeFilms are recorded at a different number of frames per second to normal televisionprogrammes. Turn this feature on when you are watching films to see the fast motionscenes clearly.Skin Tone Skin tone can be changed between -5 and 5.Colour Shift Adjust the desired colour tone.RGB Gain(Optional) You can configure the colour temperature values using the RGB Gain feature.HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use thisfeature to enhance blackness in the picture.PC Position Appears only when the input source is set to VGA/PC.Autoposition Automatically optimizes the display. Press OK to optimize.H Position This item shifts the image horizontally to the right hand side or left hand side of thescreen.V Position This item shifts the image vertically towards the top or bottom of the screen.Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding indot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.Phase Depending on the input source(computer etc.) you may see a hazy or noisy pictureon the screen. You can use phase to get a clearer picture by trial and error.Reset Resets the picture settings to factory default settings (except Game Mode).While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will beadded to the Picture Settings while in PC mode.