26Q--Link allows the television to communicate with your VCR (DVD/R)Open the Main menuMove to Setup menuAccess Setup menuMove to Q--LinkConfirm the setiing is correctfor connected Q--Link device(AV1 or AV2)Press the TV/AV button to exitThe VCR (DVD/R) must be connected with a SCART lead (full function type) attached between theAV1 or AV2 socket of the television and the appropriate socket on your VCR (DVD/R). See the VCR(DVD/R) handbook for further information. Q--Link, NEXTVIEWLINK or similar technology allowsthe television to instruct a compatible VCR (DVD/R) to record the programme that is currentlybeing displayed on screen, regardless of which programme position is VCR (DVD/R) currently setto, thus simplifying the process of recording programmes.To record the programme you are currently watchingPress the DIRECT TV REC button on the remote controlDIRECT TV RECIf the VCR (DVD/R) is off, it will automatically switch on when you press the DIRECT TV REC button.A message, sent from the VCR (DVD/R), will appear on screen showing what is being recorded, or if itis not possible to record:DOWNLOAD IN PROGRESSRecording TV sourceRecording stopped - TV source changedNo recording - Check tape or discVCR (DVD/R) is recording the programmesignal from its own tuner. If you wish youcan switch off the TV and leave the VCR(DVD/R) recording in the normal way.VCR (DVD/R) is recording the programme signalfrom the television.You must not change programme position orswitch off the TV: if you do, the VCR (DVD/R) willautomatically stop recording and switch off.The write protection tab on the back of thecassette has been removed.Unable to download, - Check EquipmentDownloadDOWNLOAD. Programme :Examples of other messages that might be displayed are:Recording in progressQ--LINKSetup menu−∧∨+OKSelectChangeExitReturnAV1 Out MonitorAV2 out TVTeletext TOPOff timer OffFlicker reduction NormalQ-Link Select AV2Text Language WestTuning MenuOSD Language AccessGeomagneticMENUTV/AV