Panasonic TX-26LXD52 Operating Instructions Manual

Also see for TX-26LXD52: Service manual Service manual

Contents

Panasonic TX-26LXD52 Operating Instructions Manual Manual pdf 6 page image

6Quick Start GuideScart cables(Not supplied)Satellite ReceiverRF cable(Not supplied)Connection and setting up optionsNote:Please ensure that the unit is disconnected from the mains beforeattaching or disconnecting any leads.Scart Connections• The VCR / DVD Recorder can be connected to the TV using a Scart cable, if you are using a Scart equipped VCR/ DVD Recorder.• Use the TV’s any Scart terminal for any VCR. Always use a “fully wired” Scart cable.• Use the TV’s AV1 or AV4 Scart terminal for any DVD Recorder. Always use a “fully wired” Scart cable.• Use the TV’s AV1 or AV4 Scart terminal for Satellite Receiver. Always use a “fully wired” Scart cable.RF Connection• Connect the RF cable to the “Aerial In” terminal of the VCR / DVD Recorder and an RF cable from the VCR / DVDRecorder “Aerial Out” terminal to the TV Aerial terminal ( ).Notes:• If using a “Q-Link” VCR / DVD Recorder, then the AV1 Scart of the VCR / DVD Recorder must be connected to theAV2 or AV4 terminal of the TV. If your VCR or DVD Recorder is not a “Q-Link” device, please consult the operatinginstruction book for that product. Further information on Q-Link can be found on page 32.• Further details of Audio / Video connections can be found on page 39-41.• Additional equipment and cables are not supplied.RF cable (Not supplied) VCR / DVD RecorderORRGBVIDEOVIDEOS-VIDEOL YPBPRRAUDIO RGBVIDEOS-VIDEOVIDEOCOMPONENTAV1 AV2 AV4