25Englishautomatically. This recording may not start if another recording is inprogress, TV signal condition is bad or there are noimages displayed. To operate [REW LIVE TV] To pause To search backward (up to 90 minutes) After pausing or searching backward, the followingbuttons are available for operation.Search backwardPlayback / Pause/Search forwardReturn to the current programme To stop [REW LIVE TV]REW LIVE TVRecording SetupAutoOffselect [Off]store If you stop [REW LIVE TV], the recorded content for[REW LIVE TV] will be deleted. [REW LIVE TV] is stopped and the recorded contentis deleted automatically in the following conditions:(Even if [REW LIVE TV] stops for the followingconditions, as long as the setting is [Auto], the newrecording starts automatically in a condition thatmakes the recording available.)• Other channels selected• Locked channel selected• Invalid channel selected• No TV signal• External input selected• When the full-screen application (TV Guide, MediaPlayer, eHELP, etc.) is launched• When the TV enters Standby or is turned off• When another recording starts3 Select the USB HDD for recording andstart setupUSB Drive AUSB Flash DiskUSB Device SetupProduct Nameselectstart setup Follow the on-screen instructions.Recording1 Display the menu and select [Setup]Setupselectaccess2 Select [Recording Setup]selectaccess[One Touch Recording]Records the current programme in the USB HDDimmediately. Confirm the remote control code is “73” (p. 22).Select the maximum recording timeOne Touch Recording 180 minutesRecording Setupselectaccess / store To start One Touch Recording[REW LIVE TV]Records the current programme to the USB HDDconstantly within the maximum recordable time. Confirm the remote control code is “73” (p. 22).Select [Auto] to start [REW LIVE TV]REW LIVE TV AutoRecording Setupselectaccess / start [REW LIVE TV] When you select [Auto], recording will start