Panasonic TX-15LT2M Operating Instructions Manual

Also see for TX-15LT2M: Service manual

Panasonic TX-15LT2M Operating Instructions Manual Manual pdf 15 page image

15TUNING MENUAUTO TUNEBefore AUTO TUNE, set the “CH SELECT” and “SYS SELECT”.Follow the step on the previous page to display the TUNING MENU screen.1. If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the “Colour SystemSelection” operation on page 14.2. After the Automatic tune is finished, press the Programme Number “Up” Button to confirm the tuning condition for each ProgrammeNumber. If some Programme Numbers are unused, it is possible to skip such Programme Numbers. Please refer to the Programme skipfunction on page 14.Helpful Hint1 Press to select AUTO TUNE.Press to access AUTO TUNE.Notes:• If you proceed with the next step all tuning data will be erased (all stationsand their programme positions stored in your TV's memory will be wiped outso that the new settings can be stored).• If you exit the procedure after this point and before AUTO TUNE iscomplete, no station information will be stored. Restart and completethe AUTO TUNE procedure so that the TV is re-tuned.2 Press to start AUTO TUNE.Once this operation is completed the TV will display the program nowstored on programme position 1.CH 2929AUTO SETUP IN PROGRESSSEARCHING :SETUP : RETURN TO TUNING MENUTV/AV : TO EXITSTORED CH29SYS SELECTMANUAL TUNESOUND SYSCOLOUR SYS5.5MHzSKIP OFFAUTOASIA/M. EASTCH SELECT DIRECTACCESSFINE TUNETUNING MENUAUTO TUNE1 Press (Side panel) until Tuning mode is reached.2 Press or to access Tuning mode.3 Press (Side panel) to access Auto tune.4 Press or to start search.Press at any time to exit the Tuning menu.AUTO TUNE (via side panel)It is also possible to use the control panel buttons on the side of the TV to tune individual programme positionsPress at any time to go back to watching TV (please readthe Note in the above procedure).TV/AV