5Before Operating This SetReceiver LocationLocate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall onthe screen.Use of some types of fluorescent lighting can reduce remote control transmitter range.Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat ormoisture.To insure optimum picture do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.Optional External EquipmentThe Video/Audio connection between components can be made with shielded video and audio cables. For bestperformance, we recommend 75 ohm coaxial aerial cable is used. Cables are available from your dealer or electronicsupply store.Before you purchase any cables, be sure you know what type of output and input connectors your various componentsrequire. Also determine the length of cable you’ll need.For optimum quality pictureWhen the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayedclearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.How to use the LCD standAdjust the stand to your desired angle. The stand angle can be adjusted between 0 ° forward to 28 ° back.280