Panasonic TQBC0627-2 Operating Instructions Manual

Panasonic TQBC0627-2 Operating Instructions Manual Manual pdf 6 page image

6Safety PrecautionsIf problems occur during useIf a problem occurs (such as no picture or no sound), or if smoke or an abnormal odour starts to come outfrom the Plasma TV, immediately unplug the mains plug from the mains outlet.• If you continue to use the Plasma TV in this condition, fire or electric shock could result. After checking that thesmoke has stopped, contact your local Panasonic dealer so that the necessary repairs can be made. Repairingthe Plasma TV yourself is extremely dangerous, and should never be attempted.If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomesdamages, disconnect the mains plug immediately.• A short circuit may occur, which could cause fire. Contact your local Panasonic dealer for any repairs that need tobe made.CAUTIONWhen using the Plasma TVDo not bring your hands, face or objects close to the ventilation holes of the Plasma TV.• Heated air comes out from the ventilation holes at the top of Plasma TV will be hot. Do not bring your hands orface, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result.Be sure to disconnect all cables before moving the Plasma TV.• If the Plasma TV is moved while some of the cables are still connected, the cables may become damaged, and fireor electric shock could result.Disconnect the mains plug from the mains socket as a safety precaution before carrying out any cleaning.• Electric shocks can result if this is not done.Clean the mains lead regularly to prevent it becoming dusty.• If dust built up on the mains lead, the resultant humidity can damage the insulation, which could result in fire. Pullthe mains plug out from the mains outlet and wipe the mains lead with a dry cloth.This Plasma TV radiates infrared rays, therefore it may affect other infrared communication equipment.Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.Cleaning and maintenanceThe front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaningcloth or a soft, lint-free cloth.• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water towhich a small amount of neutral detergent has been added, and then wipe it evenly with a dry cloth of the sametype until the surface is dry.• Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface maybecome damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,otherwise the quality of the surface may be adversely affected.If the cabinet becomes dirty, wipe it with a soft, dry cloth.• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has beenadded and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.• Do not allow any detergent to come into direct contact with the surface of the Plasma TV.If water droplets get inside the unit, operating problems may result.• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of thecabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for longperiods in contact with articles made from rubber or PVC.