23English■ To turn the power ON/OFF with the remotecontrolTo turn the power on● When the power of the unit is on (Power Indicator -red or orange), press the ( ), then the picture will be displayed.● Power Indicator: Green (Picture is displayed.)To turn the power off● When the power of the unit is on (Power Indicator -green), press the ( ),then the power will be turned off.● Power Indicator: Red (standby)Note● During operation of the “Power management”function, the power indicator turns orange in thepower off state.● After the power plug is disconnected, the powerindicator may remain lit for a while. This is not amalfunction.● Press the ( ) on theunit to turn the unit off, when the power of the unit isturned on or in standby mode.■ When the Unit is turned on for the first timeFollowing screen will be displayed.1 Select the language with andpress .English (UK)DeutschFrançaisItalianoEspañolENGLISH (US)РусскийOSD language2 For vertical installation, select[Portrait] with and press.Display orientationLandscapePortraitNote● Once the items are set, the screens won’t bedisplayed when switching on the unit next time.Each item can be reset in the following menus.[OSD language][Display orientation]■ Power ON messageThe following message may be displayed when turningthe unit power ON:No activity power off Precautions’No activity power off’ is enabled.When [No activity power off] in the [Setup] menu is set to[Enable], a warning message is displayed every time thepower is turned ON.“Power management” informationLast turn off due to ’Power management’.When “Power management” is functioned, aninformation message is displayed every time the poweris turned ON.These message displays can be set with the followingmenu:● [Power on settings] menuInformation(No activity power off)Information(Power management)
