Panasonic TH-86EQ1W Operating Instructions Manual

Also see for TH-43EQ1U: Operating instructions

Contents

Panasonic TH-86EQ1W Operating Instructions Manual Manual pdf 19 page image

19EnglishIdentifying ControlsDisplay1175-inch model 65-inch model55-inch model 50-inch model86-inch model43-inch model● Slide the lever on the rear panel to eject the powerindicator and remote control sensor.To store them, slide the same lever, or directly push inthe bottom surface of the remote control sensor.Note● For normal use, pull out the power indicator andremote control sensor from the edge side of themain unit by operating the lever on the rear panel.Depending on the setup condition such as whenusing the multi display, store them in the main unit.1 Power Indicator / Remote control sensorThe Power Indicator will light.When the power of the unit is ON (Main Power On/ Off button: ON)● Picture is displayed: green● When the unit enters the standby mode using thefollowing functions: orange (red / green)• Standby state with the “Power management”function• Standby state with [HDMI-CEC control] set to[Enable] and at least one [Link function] set toother than [Disable]• Standby state with [Network control] set to [On]• Standby state during schedule play mode● Standby state in conditions other than the above:redWhen the power of the unit is OFF (Main PowerOn / Off button: OFF): No lightNote● Even if the unit is turned off with the powerindicator off, some of the circuits are in power-onstatus.● When the power indicator is orange, powerconsumption during standby is generally largerthan that of when the power indicator is red.