13EnglishAttaching the USB Memory CoverWhen using a USB memory device, the USB memorycover can be attached to protect the device.Attach the USB memory cover usingany of the following screw positionscorresponding to the type of model.USB memory coverB: 86-inch model 75-inch model55-inch model 50-inch modelA: 65-inch modelC: 43-inch model1 Insert the USB memory device tothe USB terminal on the side of thedisplay.USB memoryUSB terminal2 Attach the USB memory cover,aligning the M4 screw with the screwhole of the display unit.3 Tighten the M4 screw to fix the USBmemory cover.M4 screwCautions whenmoving 75-inch model86-inch modelThe display has handles for carrying. Hold them whenmoving.86-inch modelHandle75-inch modelHandleNote● Do not hold parts other than the handles.● The following number of people are required to carrythis unit.86-inch model 75-inch model : 4 or moreIf this is not observed, the unit may drop, resulting ininjury.● When carrying the unit, keep the liquid crystal panelupright.Carrying the unit with the surface of the liquid crystalpanel facing up or down may cause deformation ofthe panel, or internal damage.● Do not hold the upper, lower, right and left frames orthe corners of the unit. Do not hold the front surfaceof the liquid crystal panel. Also, do not hit such parts.Doing so may damage the liquid crystal panel.Also, the panel may crack, resulting in injury.