- 79 -■ To change 3D format manuallyWhen the image is not changed properly using 3D / 2D mode, use thismanual setting.1. Display 3D Mode Selection (Manual) with (red) during aboveoperation.2. Select the mode with / and press OK to set.Original:Displays the source image as it is.● Use to identify the format type of the source image.Watching > 3D > Source image formatSide by Side - 3D / Side by Side - 2D / Top and Bottom - 3D / Top andBottom - 2D:Displays the mode you select.● Not valid in Analogue TV and AV mode2D→3D:Converts 2D images into 3D.● Please note the 3D images appear slightly different from theoriginals.● Using this function for profit-making purposes, or publically showingimages converted from 2D to 3D in places such as shops or hotels,etc. may infringe on the rights of the copyright holder protectedunder copyright law.3D Settings1. Display the menu with MENU.2. Select Picture > 3D Settings with / and press OK to access.3. Select one of the following items with / and press OK to access.3D Detection / 3D Signal Message / 3D Refresh Rate / 2D→3D Depth / 3DAdjustment / L/R Picture Swap / Edge Smoother / Safety Precautions4. Set with / and press OK to store.● To exit the menu screenEXIT
