Panasonic TH-85PF12E Operating Instructions Manual

Also see for TH-85PF12E: Operating instructions Operating instructions Brochure & specs

Contents

Panasonic TH-85PF12E Operating Instructions Manual Manual pdf 6 page image

6++--Accessories SupplyAccessoriesClamper × 1 Eyebolt cap × 1Blind sheet × 1 Allen wrenchEyebolt × 1(M12)Ferrite core × 2 Noise cut filterBatteries forthe RemoteControlTransmitter(R6(UM3) Size× 2)Power supplycordFixing band× 2Remote ControlTransmitterEUR7636090ROperatingInstructionbookCheck that you have the accessories and items shownRemote Control BatteriesUse the clamperwhen connecting aLAN cable.(see page 18)Helpful Hint:For frequent remote control users, replace old batteries with Alkalinebatteries for longer life.Precaution on battery useIncorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.Disposal of batteries should be in an environment-friendly manner.Observe the following precaution:1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.6. Do not burn or breakup batteries.Batteries must not be exposed to excessive heat such as sunshine, fire or the like.CD-ROM(Operatinginstructions)Requires two R6 batteries.1. Pull and hold the hook, then openthe battery cover.2. Insert batteries - note correctpolarity ( + and -).3. Replace the cover.“R6 (UM3)” sizeUse the Ferrite cores and Noise cut filter tocomply with the EMC standard. (see page18)