Panasonic TH-85PB1E Operating Instructions Manual

Also see for TH-103PB1E: Operating instructions Service manual

Contents

Panasonic TH-85PB1E Operating Instructions Manual Manual pdf 11 page image

11Network SetupWireless LANYou can make detailed wireless LAN settings.You can configure settings when the wireless module (ET-WM200E) is mounted.Setting network numberSelect [Wireless LAN] in [Network Setup] menu and press1 button.Select the number to be connected for2 [Wireless LAN].[Off], [S-DIRECT], [M-DIRECT], [S-MAP], [1]-[4],• [USER1]-[USER3]Selecting [Off] disables the wireless LAN.•Network number: [S-DIRECT], [S-MAP] and [1]-[4] are available only when connecting via wireless LAN with• the application software the “Wireless Manager”. [S-MAP] is for showing connectable displays on the networkaccording to their levels of radio wave intensity. For details, refer to the operation manual of the “WirelessManager”.[M-DIRECT] and [S-DIRECT] are not supported in “Wireless Manager mobile edition 5.5”.•Wireless LANSaveWireless LAN OffConfi guration of Wireless LAN [M-DIRECT]Even if there is no access point, you can still connect the Display to computer via the infrastructure. In addition, theconnection with the iPad / iPhone / iPod touch is much easier.For more information, see the website below.http://panasonic.net/prodisplays/download/software/index.htmlSelect [M-DIRECT] for [Wireless LAN].1 Wireless LANSaveWireless LAN255.255.255. 0192.168. 10. 100M-DIRECTIP addressSubnet mask1Channel********KeySSIDAddress settings1 Select the item and press .I192.168. 0. 8IP address2 Use ◄► to select a digit.3 Use ▲▼ to change a number.4 Press .Pressing will cancel the address change.Press ▼ to go to the next item.2 IP address(Displaying and setting the IPaddress)Enter the IP address.Subnet mask(Displaying and setting the subnetmask)Enter the subnet mask.SSID Select [M-DIRECT] in [Wireless LAN], then the SSID can be set.Entering characters page 15Channel Select [M-DIRECT] in [Wireless LAN], then the Channel can be set.Select a channel for the access point ( page 6).KeySelect [M-DIRECT] in [Wireless LAN], then the Key can be setSetting a key for the access point. Input either 8 to 63 alphanumerics ora 64 digit string in the hexadecimal format.You can configure more precise network settings, if you select [M-DIRECT] or [USER1] - [USER3] (user) for[Wireless LAN].