Panasonic TH-80LF50W Operating Instructions Manual

Contents

Panasonic TH-80LF50W Operating Instructions Manual Manual pdf 28 page image

000SoundNormalNormaliseNormalOffTrebleSound ModeBalanceBassSurround1/2SDI Sound OutputThis menu is available only when selecting a slot that the following terminal board is installed:HD-SDI Terminal Board with audio (TY-FB10HD)2/2Sound OutRight Channel Channel 1Left Channel Channel 1OffLevel Meter OffSDI Sound Output Item DetailsLeft Channel Channel 1 to Channel 16Selects left audio channel.Right Channel Channel 1 to Channel 16Selects right audio channel.Sound OutOn OffOn: Enables audio output.Off: Disables audio output.Level MeterOff 1-8ch 9-16chSets audio channels to show in the audio level meter.8 channels are displayed in the audio level meter; 4 channelseach on both right and left sides of the display.Off: Hides the audio level meter.1-8ch: Displays the audio level meter (1-8ch)9-16ch : Displays the audio level meter (9-16ch)28Sound Adjustment1 Press to display the Sound menu.Press to select the menu to adjust.Select the desired level by listening to the sound.Note: Bass, Treble and Surround settings are memorized separately for each Sound Mode.2 Select to adjust each item.While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or theACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)Item DetailsSound ModeNormal: Emits the original sound.Dynamic: Accentuates sharp sound.Clear: Attenuates human voice.Bass Adjusts low pitch sounds.Treble Adjusts high pitch sounds.Balance Adjusts left and right volumes.Surround Select On or Off.3 Press to exit from adjust mode.