Panasonic TH-65PF9BK Service Manual

Also see for TH-65PF9BK: Operating instructions

Contents

Panasonic TH-65PF9BK Service Manual Manual pdf 37 page image

10.3. Power control adjustmentInstrument Name Connection Remarks· PC (RGB) signal generator(Leader: VGA / No.9 signal)· Wattmeter· PC input· Connect the AC power of theadjustment set to the wattmeter.Set “RGB” at ‘COMPONENT / RGB-INSELECT’ in Setup Menu.Procedure Remarks[condition]· Make sure the set is aged for 30 minutes or more before adjustment.· Voltage 120V 50 / 60Hz (variation within 1%)· Volume at minimum and screen size at full· PC input and picture menu at normalized Dynamic1. Connect the set’s AC power to the wattmeter.2. Receive the VGA No.9 signal from Leader.3. Select the PWRCTL item in Panel APL / ABL in the IIC mode.4. Adjust PWRCTL so the set´s power consumption is description below.Adjust to shift large to small for DAC.Factory adjustment with OSD65" 680+5 / -10WBUSCON without OSD65" 680+5 / -10WNo.9 SignalTop half: Full color barBottom half: Horizontal 10 steps barNotes:1. When passing through factoryadjustment mode, the power fewwatts which goes down is theconsideration being completed.2. Adjust the large number for DACwhen they have 2 adjustmentpoints.37TH-65PF9BK / TH-65PF9EK