15INPUT MENU ENTER/+ /VOL-/Basic ControlsMain UnitMENU Screen ON / OFFEach time the MENU button is pressed, the menuscreen will switch. (see page 17)Normal Viewing PictureSound Pos. /Size SetupINPUT button(INPUT signal selection)(see page 14)Volume AdjustmentVolume Up “+” Down “–”When the menu screen isdisplayed:“+” : press to move the cursor up“–” : press to move the cursor down(see page 17)Enter / Aspect button(see page 17)Remote control sensorMain Power On / Off SwitchPower IndicatorThe Power Indicator will light.• Power-OFF .... Indicator not illuminated (The unit willstill consume some power as long asthe power cord is still inserted into thewall outlet.)• Standby ........ RedOrange (When “Slot power” is set to“On”.)Orange (Depending on the type ofthe function board installed, when thepower is supplied to the slot)Orange (When “Control I/F Select” isset to “LAN”.)• Power-ON ...... Green• PC Power management (DPMS)..........................Orange (With PC input signal.)When this function is set to On, it operates under the following conditions to turn the power onor off automatically.When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signalinput:→ Power is turned off (standby); the power indicator lights up orange.When pictures (HD/VD sync signals) are subsequently detected:→ Power is turned on; the power indicator lights up green.• DVI-D Power management..........................Orange (With DVI input signal.)When this function is set to On, it operates under the following conditions to turn the power onor off automatically.When no pictures (sync signal) are detected for 30 or so seconds during DVI signal input:→ Power is turned off (standby); the power indicator lights up orange.When pictures (sync signal) are subsequently detected:→ Power is turned on; the power indicator lights up green.