Panasonic TH-65PB1E Operating Instructions Manual

Also see for TH-65PB1E: Operating instructions Network operation guide Function guide

Contents

Panasonic TH-65PB1E Operating Instructions Manual Manual pdf 9 page image

9+-+-Accessories SupplyAccessoriesPower supply cord Clamper × 1TMME289• elite Panaboard software• elite Panaboard book• Operating InstructionsDisplay OperationsNetwork OperationsElectronic Pen Operations• Software license statementsGNU GENERAL PUBLIC LICENSEGNU LESSER GENERAL PUBLIC LICENSEFerrite core × 2J0KG00000014Batteries for the RemoteControl Transmitter(R6 (UM3) Size × 2)Remote ControlTransmitterN2QAYB000691OperatingInstruction bookCheck that you have the accessories and items shownRemote Control BatteriesRequires two R6 batteries.1. Pull and hold the hook, then openthe battery cover.2. Insert batteries - note correctpolarity ( + and -).3. Replace the cover.Use the Ferrite cores to comply with the EMC standard.(refer to “Operating Instructions, Network Operations”)Helpful Hint:For frequent remote control users, replace old batteries with Alkalinebatteries for longer life.Precaution on battery useIncorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.Disposal of batteries should be in an environment-friendly manner.Observe the following precaution:1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.5. Battery replacement is necessary when remote control acts sporadically or stops operating the Plasma Display set.6. Do not burn or breakup batteries.7. Batteries must not be exposed to excessive heat such as sunshine, re or the like.“R6 (UM3)” sizeSoftware DVD-ROM × 1Electronic Pen setRefer to “Operating Instructions,Electronic Pen Operations”.