Panasonic TH-65PB1E Operating Instructions Manual

Also see for TH-65PB1E: Operating instructions Network operation guide Function guide

Contents

Panasonic TH-65PB1E Operating Instructions Manual Manual pdf 36 page image

36Set Touch Pen mode.Select “Touch-Pen Mode” in “Setup” menu and press button.“SLOT INPUT” is displayed when an optional Terminal Board is installed.When a Terminal Board with dual input terminals is installed, “SLOT INPUT A”and “SLOT INPUT B” are displayed.Touch-Pen ModeOffSLOT INPUTHDMIOffOffOffNETWORKDVIPCOffTouch-Pen ModeSet “On” or “Off” for each input terminal.If you switch to the input terminal that is set to “On”, the mode becomes Touch Penmode.“Touch-Pen: On” is displayed in Touch Pen mode.Notes:• When the following signal input, “Touch-Pen Mode” are disabled:50i/50p/25p/24sF/24p signals and PC format signals with 50 Hz vertical frequency.• The electronic pen cannot be used when VIDEO or COMPONENT input is selected.• When using the electronic pen, adjust “Pos./Size” so that the screen of the computer can be correctly displayed.(see page 25)Setting the Remote ControlYou can also turn Touch Pen mode On/Off with the FUNCTION buttons on the remote control. (see page 45)In Touch Pen mode, the menus and functions are restricted as follows.Pos./Size menu 1:1 Pixel Mode: OnOver scan: OffPicture menu Picture Mode: “Normal” or “Dynamic” only. (see page 28)Setup menu3D SettingsSignalExtended life settingsMULTI DISPLAY SetupPortrait Setup3D Function: OffFRAME CREATION: OffPicture Mode: “Normal” or “Dynamic” only. (see page 28)MULTI DISPLAY Setup: OffPortrait Setup: OffOptions menu Display size: UnavailableRotate: UnavailableASPECT Controls 16:9Digital Zoom UnavailableOnTouch-Pen