9; Power indicatorLights green when the power of the electronic pen is “on”.Blinks green when the battery of the electronic pen is low.Lights red during charging and turns off when charging is completed.Blinks red when no rechargeable battery is in during charging or when an incompatible battery is used.< Function indicatorIndicates the selected function of the electronic pen.Notice• Check that the power indicator is green when using the electronic pen.• Contact the pen tip to the screen when using the electronic pen.• Using the electronic pen with the wireless module (ET-WM200E) connected may result in malfunctionof the electronic pen due to radio wave interference as an example. In that case, set “Wireless Lan” to“Off” before using the electronic pen. (See Network Operations of the operating instructions)Notes• You can use up to three electronic pens at the same time.• If a certain time (approx. 5 seconds) has passed without operation, the electronic pen enters the sleepstate to save power consumption.Power indicator Operation stateOff Power “off”Lighting green Power “on”Blinking green Low batteryLighting red ChargingBlinking red Charging errorOff/Red/Blue/YellowDraws in the selected color using a marker.• When the indicator is off, the pen becomes a blackmarker pen.• When yellow is selected, the pen becomes ahighlighter.• Line thickness of the marker/highlighter can beselected in the drawing menu.WhiteErases drawn data.• Size of the eraser can be selected in the drawingmenu.White (Blinking) Mouse modeBlinking red and greenalternatelyElectronic pen registration mode (see page 13)Electronic pen is not registered.