Panasonic TH-65BFE1W Operating Instructions Manual

Also see for TH-65BFE1W: Operating instructions Service manual

Contents

Panasonic TH-65BFE1W Operating Instructions Manual Manual pdf 16 page image

16EnglishUsing the touch panel1 Turn off the Main power switch of the display.2 Connect the computer and the USB cable of the display.3 Connect the computer and the video input terminal of the display.4 Turn on the Main power switch of the display. If required, press the [POWER] button of the remote control to turnon the display.■ Display settingsPlease make the following display settings.• Switch the input signal to the video input from the computer.• Set the screen position such that the computer’s screen correctly appears on the display.AAAAAA: Infrared transmitting partUSBTYPE A(Approx. 2 m)ComputerNote● Pulling the USB cable with excessive force may result in the breakdown of the touch panel. Therefore, handle itcarefully.● For preventing disconnection of the USB cable for touch panel, fix it with the device by using the clamper. (see page15)● Wipe off dirt on the infrared transmitting part with a soft cloth.Wipe off dirt on the infrared transmitting part with a soft cloth once in a day. When a defect has occurred because ofdirt on the infrared transmitting part, lightly wiping it will restore the function. If the infrared transmitting part is heavilysoiled, dip the cloth in a neutral cleaning agent diluted with water and firmly squeeze it. Use this cloth and gentlyclean the infrared transmitting part. Finally, wipe it with a dry cloth.Using WhiteBoard softwareWhiteBoard software allows you to use various functions, for example, you can capture documents and pictures, drawwith pen, etc.1 Obtain the WhiteBoard software (Windows / Mac) from the support site below.https://panasonic.net/cns/prodisplays/2 For details of operation, refer to the manual of WhiteBoard software on the site above.