10EnglishRemote Control BatteriesOpen the battery cover.AA/R6/LR6 type Insert batteries and closethe battery cover.(Insert starting from theside.)Note● Incorrect installation of the batteries can causebattery leakage and corrosion that will damage theremote control.● Disposal of batteries should be done in anenvironment-friendly manner.Take the following precautions.1. Batteries shall always be replaced as a pair.2. Do not combine a used battery with a new one.3. Do not mix battery types (example; manganesedioxide battery and alkaline battery etc.).4. Do not attempt to charge, disassemble, or burn usedbatteries.5. Do not burn or breakup batteries.Moreover, batteries must not be exposed to excessiveheat such as sunshine, fire or the like.Optional accessoryPlease firmly install the pedestal stand sold separately.Installation should be done by a professional vendor.Pedestal• TY-ST75PE9Note● When installing the pedestal, thoroughly read theinstructions manual included with the product andcorrectly install the stand. Make sure to take the fall-prevention measures.● For ensuring safety and performance, ask yourdistributor or a professional vendor to carry out theinstallation work.● Please note that we will not be responsible for anyproduct damage that happens due to defects in theinstallation environment of stand or wall-mountingclasp even if it is within the warranty period.● For the products that you are no longer using, aska professional contractor to promptly remove suchproducts.● When installing, “crack in LCD panel” may occurbecause of impact etc. Therefore, please carefullyhandle the product.● The part numbers of optional items are subject tochange without notice.