Panasonic TH-58PF20U Operating Instructions Manual

Also see for TH-58PF20U TENTATIVE: Operating instructions Product speci?cation Manual de instrucciones

Contents

Panasonic TH-58PF20U Operating Instructions Manual Manual pdf 41 page image

1/2SIGNALEXTENDED LIFE SETTINGSINPUT LABELSET UPOFFSTANDBY SAVE OFFPC POWER MANAGEMENT OFFDVI-D POWER MANAGEMENT OFFAUTO POWER OFF OFFOSD LANGUAGE ENGLISH (US)COMPONENT/RGB-IN SELECTRGBSCREENSAVERPOWER SAVE41Reduces power consumptionPress to select“POWER SAVE”“STANDBY SAVE”“PC POWER MANAGEMENT”“DVI-D POWER MANAGEMENT”“AUTO POWER OFF”.Press to select “ON” or “OFF”.On OffPress to exit from SET UP.• POWER SAVE: When this function is turned ON, luminous level of the Plasma Display is suppressed, sopower consumption is reduced.• STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced duringpower supply standby (see page 14, 17, 18), so standby power of the set is reduced.• PC POWER MANAGEMENT: When this function is set to ON, it operates under the following conditions to turn the poweron or off automatically.When no pictures (HD/VD sync signals) are detected for 30 or so seconds during PC signalinput:Power is turned off (standby); the power indicator lights up orange.When pictures (HD/VD sync signals) are subsequently detected:Power is turned on; the power indicator lights up green.Notes:• This function operates only during PC signal input.• This function is effective when “SYNC” is set to “AUTO”, “COMPONENT / RGB-IN SELECT”is set to “RGB” and during normal viewing (one picture screen).• DVI-D POWER MANAGEMENT: When this function is set to ON, it operates under the following conditions to turn thepower on or off automatically.When no pictures (sync signal) are detected for 30 or so seconds during DVI signalinput:Power is turned off (standby); the power indicator lights up orange.When pictures (sync signal) are subsequently detected:Power is turned on; the power indicator lights up green.Notes:• This function operates only during DVI signal input.• This function is invalid during input from DVI-D Terminal Board (TY-FB11DD).• Depending on the type of terminal board equipped, this function may be invalid.• AUTO POWER OFF: Equipment power supply is turned OFF when there is no signal.When this is set to ON, the power supply of the unit goes Off 10 minutes after the inputsignals stop.Note:This function is effective during normal viewing (one picture screen).123