Safety PrecautionsWARRNING■ SetupOptional accessorySecurely install the Installation Mount of the optionalaccessories. Ask an authorized dealer for installation. 2or more people are required for installation.• Installation MountTY-VK55LV2• Early Warning License (Multi Monitoring & ControlSoftware)Basic license / 3 years license (ET-SWA100 series*1)• Video Wall ManagerTY-VUK10 *2*1: The part number suffix may differ depending on thelicense type.*2: Supports Ver 1.11 or laterSmall parts may be accidentally swallowed by smallchildren and are a choking hazard. Keep small partsaway from young children. Discard unneeded smallparts and other objects. This includes plastic bags andsheets which present a suffocation hazard for smallchildren.Do not place the Display on a sloping or unstablesurface and make sure the base does not overhangan edge.• The Display may fall off or tip over.Install this display in a location with minimalvibration and which can support its weight.• If the unit falls it may cause injury and certainly mayresult in malfunction.Do not place any objects on top of the Display.• If a foreign object or water gets inside the Display, ashort-circuit may occur which could result in fire orelectric shock. If any foreign object gets inside theDisplay, please consult your local Panasonic dealer.Transport only in an upright position!• Transporting the unit with its liquid crystal panelfacing upwards or downwards may damage theinternal circuitry.Make sure the ventilation openings in the unit arenot obstructed in any way, by curtains or otherobjects.See page 7 for the requirements for sufficientventilation.Caution - For use only with UL Listed Wall MountBracket with minimum weight/load 27 (59.8 lbs).When installing the Display vertically;When installing the Display vertically, be sure that thePower Indicator is on the lower edge. Heat is generatedand it may cause fire or damage to the Display.The rotation direction is displayed on the rating plate andback cover of this unit. Confirm it during installation.90Cautions for Wall Installation• Installation should be carried out by a professional.Installing the Display incorrectly may lead to anaccident that results in serious injury or even death.• When installation is to be made on a wall, a wallhanging bracket that conforms to VESA standardsmust be used.VESA 400 mm × 400 mm• Before installation, make sure the mounting locationhas enough strength to support the weight of the LCDdisplay and the wall hanging bracket.• If you decide to no longer use the Display on thewall, engage a professional to remove it as soon aspossible.• When mounting the Display on a wall, make surethe mounting screws and power cable do not makecontact with any metal objects inside the wall. Anelectric short circuit or shock might be the result ofcontact with metal in the wall.Do not place the display where it may be affected bysalt or corrosive gas.• Doing so may cause the display to fail due tocorrosion. Also, the unit may malfunction.Do not install the Display where it is exposed todirect sunlight.• If the unit is exposed to direct sunlight even indoors,the temperature rise of the liquid crystal panel maycause malfunction.■ When using the LCD DisplayThe Display is designed for 110 - 127 or 220 - 240 VAC, 50/60 Hz.Do not cover the ventilation holes.• Doing so may cause the Display to overheat. Thismay damage the display or even cause it to catch fire.Do not stick any foreign objects into the Display.• Do not insert any metal or flammable objects into the5English