|
Identifying ControlsMain unit1 21 Main power switch (○ / I)Switches the main power ON (I) / OFF (○).● Turning ON/OFF the is thesame as plugging or unplugging the power cableplug. Switch the ON (I), andthen turn the power ON / OFF with the remotecontrol or 2 Power Indicator / Remote control sensor (Back ofthe unit)The Power Indicator will light.When the power of the unit is ON (Main powerswitch: ON (I))● Picture is displayed: Green● Power OFF (standby):● When [General settings]-[Eco mode] is set to[low power standby]:Red● When [General settings]-[Eco mode] is set to[normal]:OrangeWhen the power to the unit is OFF (Main powerswitch: OFF (○)): No lightNote● When the power indicator is orange, powerconsumption during standby is larger than that ofwhen the power indicator is red.MUTE INPUT MENU1 2 3 4 5 6 7 81 [ ] buttonUse this button to turn the Display on or put theDisplay to standby.2 [MUTE] buttonSwitch the audio mute ON/OFF.3 [INPUT] buttonChoose the input source.● Used as [ENTER] button in the On-Screen-Display menu.4 [ ] buttonIncrease the adjustment while OSD menu is on, orincrease the audio output level while OSD menuis off.5 [ ] buttonDecrease the adjustment while OSD menu is on,or decrease the audio output level while OSDmenu is off.6 [ ] buttonMove the highlight bar up to adjust the selecteditem while OSD menu is on.7 [ ] buttonMove the highlight bar down to adjust the selecteditem while OSD menu is on.8 [MENU] buttonReturn to previous menu while OSD menu is on, orto activate the OSD menu when OSD menu is off.English12
PreviousNext |