31Cleaning and TroubleshootingCleaningCaution When Using this Display Do not bring your hands, face or objects close to the ventilation holes of this Display. The top of this Display is usuallyvery hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personalinjuries may occur if any body parts are brought too close. Placing any object near the top of this Display could also resultin heat related damage to the object as well as the Display itself. Be sure to disconnect all cables before moving this Display. Moving this Display with its cables attached may damage the# ! Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning ormaintenance procedure.Front Panel Cleaning Instructions The front of this Display has been specially treated. Wipe the surface gently using only a cleaning cloth or a soft, lint-freecloth. If the surface becomes dirty, soak a soft, lint-free cloth in a mild detergent solution. Wring the cloth to remove excessliquid. Wipe the surface of this Display to remove dirt. Then use a dry cloth of the same type to dry. & #< '! Do not use volatile substances such as insert sprays, solvents and thinners.Cabinet Cleaning Instructions If the cabinet becomes dirty, wipe the cabinet with a soft, dry cloth. If the cabinet is extremely dirty, soak a lint-free cloth in a mild detergent solution. Wring the cloth to remove as muchmoisture as possible. Wipe the cabinet. Use another dry cloth to wipe over until the surface is dry. Do not allow any water or detergent to come into contact with the surface of this Display. If water or moisture gets insidethe unit, operating problems, electrical and shock hazards may result. # & #< '! Do not use volatile substances such as insert sprays, solvents and thinners on the cabinet. Do not place anything made from rubber or PVC near the cabinet for any extended periods of time.