Panasonic TH-55LFV5W Operating Instructions Manual

Panasonic TH-55LFV5W Operating Instructions Manual Manual pdf 20 page image

20OSD Menu Setup for Network ConnectionTo proceed the network setting, you will have to enter the OSD menu.SERIAL CONTROL:Select {LAN} as the nectwork control port.1. Press [MENU] button on this Display’s control.2. Press [ ] or [ ] button to select the {ADVANCEDOPTION} menu.3. Press [INPUT] button to enter the submenu.4. In the submenu, press [ ] or [ ] button to select the{SERIAL CONTROL} menu, press [ ] or [ ] button toselect {LAN}.123SET EXIT MENU:SEL :NEXTINPUT CHANGETERMINAL SETTINGCOLOR SYSTEMSCAN MODESERIAL CONTROLLAN SETTINGADVANCED OPTION RESETFACTORY RESET:RETURN :EXIT MENUNORMALAUTOINITIAL INPUT OFFOVERSCANLANADVANCED OPTION5. Press [MENU] button to return to the previous menu, orpress [MENU] button several times to exit the OSD menu.LAN SETTING:Assign {IP ADDRESS}, {SUBNET MASK}, and {DEFAULTGATEWAY} for this Display.NOTE: The {LAN SETTING} is available only after setting the{SERIAL CONTROL} to {LAN}.1. Press [MENU] button on this Display’s control.2. Press [ ] or [ ] button to select the {LAN SETTING}menu.3. Press [INPUT] button to enter the submenu.123SET EXIT MENU:SEL :NEXTINPUT CHANGETERMINAL SETTINGCOLOR SYSTEMSCAN MODESERIAL CONTROLLAN SETTINGADVANCED OPTION RESETFACTORY RESET:RETURN :EXIT MENUNORMALAUTOINITIAL INPUT OFFOVERSCANLANADVANCED OPTION4. In the submenu, press [ ] or [ ] button to select the{DHCP CLIENT} menu, press [ ] or [ ] button to select{ON}.123EXIT MENU:SELDHCP CLIENTIP ADDRESSSUBNET MASKDEFAULT GATEWAY:RETURN :EXIT MENUON+-:ADJADVANCED OPTIONLAN SETTING5. Press [MENU] button to return to the previous menu, orpress [MENU] button several times to exit the OSD menu.DHCP CLIENTTo obtain an IP address automatically using a DHCP server,set this to {ON}. If DHCP server is not used, set this to {OFF}.IP ADDRESSEnter an IP address if DHCP server is not used.SUBNET MASKEnter a subnet mask if DHCP server is not used.DEFAULT GATEWAYEnter a gateway address if DHCP server is not used.NOTES: To use a DHCP server, make sure the DHCP server isstarted. Contact your network administrator for details on settings.