Panasonic TH-55LFV5W Operating Instructions Manual

Panasonic TH-55LFV5W Operating Instructions Manual Manual pdf 26 page image

X^EXIT MENU+-:SEL :RETURN :EXIT MENUSCHEDULETODAY12345762012 . 01 . 11 THU 20 : 19 : 55ON: :EVERY DAYOFF INPUTWEDSATMONTHUSUNTUEFRIEVERY WEEK41 2 33. Press [ ] or [ ] button to select the schedule:1 POWER-ON schedule: Press [ ] or [ ] button toset the hour and minute for this Display to turn on.2 POWER-OFF schedule: Press [ ] or [ ] button toset the hour and minute for this Display to turn off.Select or leave an empty “__” for both the hour and minuteslot if you do not want to use this power-on or power-offschedule.3 INPUT-SOURCE selection: Press [ ] or [ ] buttonto select an input source. If no input source isselected, the input source will remain the same aslast selected.4 DATE schedule: Press [ ] button to select whichday in a week this schedule item will be take effect,and then press the [SET] button.4. For more schedule settings, press [,><] button and thenrepeat the steps above. A check mark in the box nextto the number of the schedule item indicates that theselected schedule is in effect.NOTES: The {EVERY DAY} selection in a schedule item takespriority over the other weekly schedules. If the schedule overlap, the scheduled power-on timetakes priority over scheduled power-off time. If there are two schedule items programmed for the sametime, the highest numbered schedule takes priority. Forexample, if schedule items #1 and #2 both set this Displayto power on at 7:00 AM and off at 5:00 PM, then onlyschedule item # 1 will take effect.DATE AND TIMEAdjust the current date and time for this Display’s internalclock.EXIT MENU:SEL +-:ADJ :RETURN :EXIT MENUDATE AND TIMEYEARMONTHDAYHOURMINUTEDAYLIGHT SAVING TIMECURRENT DATE TIME201208042020OFF2011.01.01 00:00:001. Press [SET] button to enter the submenu.2. Press [ ] or [ ] button to toggle among the {YEAR},{MONTH}, {DAY}, {HOUR}, {MINUTE}, and {DAYLIGHTSAVING TIME} settings.3. Press [ ] or [ ] button to adjust all settings except{DAYLIGHT SAVING TIME}.CONFIGURATION1 RESETReset all settings in the CONFIGURATION1 menu to factorypreset values.CONFIGURATION2 menu123SET EXIT MENU2:SEL :NEXTLANGUAGEOSD TURN OFFOSD H POSITIONOSD V POSITIONMONITOR IDIR CONTROLTILINGPOWER ON DELAYCONFIGURATION2 RESETINFORMATION OSDMONITOR INFORMATION:RETURN :EXIT MENUENGLISHOFF50503 SEC.145CONFIGURATION2LANGUAGESelect the language used in the OSD menu.The options are: { } / { } / { } /{ } / { } / { } / { } / { } /{ }.OSD TURN OFFSet the period of time the OSD menu stays on the screen.The options are: {] `XZ} seconds.OSD H POSITIONAdjust the horizontal position of the OSD menu.OSD V POSITIONAdjust the vertical position of the OSD menu.INFORMATION OSDSet the period of time the information OSD displayed on theupper right corner of the screen. The information OSD willdisplay when input signal is changed.The information OSD will not appear on the screen with {OFF}selection.The options are: {'&& ,?! `Z ,?!}.MONITOR INFORMATIONDisplays the information about your display, including MODELNAME and SERIAL.MONITOR IDSet the ID number for controlling this Display via the RS232Cconnection or by ID Remote Control. Each display must havea unique ID number when multiple sets of this Display areconnected.