29HEAT STATUS ( ( Display at any time.EXIT MENU:RETURN :EXIT MENUHEAT STATUSCOOLING FAN OFFTEMPERATURE:SENSOR 1SENSOR 235.7 C / 96.2 F30.2 C / 86.3 FSCREEN SAVER4 # ( ( image persistence”.EXIT MENU:SEL +-:ADJ :RETURN :EXIT MENUSCREEN SAVERCOOLING FANBRIGHTNESSMOTIONAUTOOFFOFFz {COOLING FANE ON} to turn on the cooling fan E AUTO} to turn on/off the cooling fan 6 &=JE$z The default {AUTO fan if the temperature of 65 °C!152 °F" (30 minutes after cooling (62 °C!144 °F"z 9 # screen once the temperature reaches 79 °C9function except [Power # #z Once the temperature reaches 80 °C!176 °F" 6 # z {BRIGHTNESSE ON # ( # ^ < # #z {MOTIONE !10 ~ 900E / {OFF"( ( ( ( ! ( "SIDE BORDER COLOR9A # ( # # sides of 4:3 images.CONFIGURATION3 RESET' CONFIGURATION3 menu to factorypreset values.ADVANCED OPTION menu123SET EXIT MENU:SEL :NEXTINPUT CHANGETERMINAL SETTINGCOLOR SYSTEMSCAN MODESERIAL CONTROLLAN SETTINGADVANCED OPTION RESETFACTORY RESET:RETURN :EXIT MENUNORMALAUTOINITIAL INPUT OFFOVERSCANRS - 232CADVANCED OPTIONCALIBRATION DATA SAVECALIBRATION DATA LOADINPUT CHANGEE ( NORMAL} or {QUICK}.NOTE: The selection {QUICK} may cause a slight noise.TERMINAL SETTINGE /O+I+ to their signal format depending on their source device.z {DVI MODE$? (I+ z E DVI-PC <4z E DVI-HD device.z {HDMI SIGNAL}: Used for HDMI signal.z E LIMITED %3 *-2 (*23 ( 'w ^z E FULL *23 !(; *22"123EXIT MENU:SEL +-:ADJDVI-MODEHDMI SIGNAL:RETURN :EXIT MENUDVI-PCFULLADVANCED OPTIONTERMINAL SETTINGCOLOR SYSTEME 4E ( The options are: {AUTO} / {NTSC} / {PAL} / {SECAM} /{4.43NTSC} / {PAL-60}.NOTE: This item is functional for VIDEO input only.SCAN MODE4 6 ( z {OVERSCAN # 82¦( (the image. The rest of the areas surrounding the image# ((z {UNDERSCAN