21OSD Menu Setup for Network Connection =E SERIAL CONTROL:E LAN 1. Press [MENU# 6 2. Press [ ] or [ # ADVANCEDOPTION} menu.3. Press [INPUT# # 4. + # ] or [ # {SERIAL CONTROL} menu, press [ ] or [ # select {LAN}.123SET EXIT MENU:SEL :NEXTINPUT CHANGETERMINAL SETTINGCOLOR SYSTEMSCAN MODESERIAL CONTROLLAN SETTINGADVANCED OPTION RESETFACTORY RESET:RETURN :EXIT MENUNORMALAUTOINITIAL INPUT OFFOVERSCANLANADVANCED OPTION5. Press [MENU# press [MENU# =E LAN SETTING:9 IP ADDRESS}, {SUBNET MASK}, and {DEFAULTGATEWAY} for this Display.NOTE:z The {LAN SETTING # ( {SERIAL CONTROL} to {LAN}.1. Press [MENU# 6 2. Press [ ] or [ # LAN SETTING}menu.3. Press [INPUT# # 123SET EXIT MENU:SEL :NEXTINPUT CHANGETERMINAL SETTINGCOLOR SYSTEMSCAN MODESERIAL CONTROLLAN SETTINGADVANCED OPTION RESETFACTORY RESET:RETURN :EXIT MENUNORMALAUTOINITIAL INPUT OFFOVERSCANLANADVANCED OPTION4. + # ] or [ # {DHCP CLIENT} menu, press [ ] or [ # {ON}.123EXIT MENU:SELDHCP CLIENTIP ADDRESSSUBNET MASKDEFAULT GATEWAY:RETURN :EXIT MENUON+-:ADJADVANCED OPTIONLAN SETTING5. Press [MENU# press [MENU# =E DHCP CLIENT# +< /4< set this to {ON}. If DHCP server is not used, set this to {OFF}.IP ADDRESSEnter an IP address if DHCP server is not used.SUBNET MASKJ # (/4< DEFAULT GATEWAYJ (/4< NOTES:z To use a DHCP server, make sure the DHCP server isstarted.z 4 (