Panasonic TH-50LFB70E Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Contents

Panasonic TH-50LFB70E Operating Instructions Manual Manual pdf 10 page image

10EnglishConnectionsPlug the AC cord into the display unit.Plug the AC cord until it clicks.Note:Make sure that the AC cord is locked onboth the left and right sides.AC cord fi xingUnplug the AC cordUnplug the AC cord pressing thetwo knobs.Note:When disconnecting the AC cord, beabsolutely sure to disconnect the ACcord plug at the socket outlet first.1 2Attach the clamper To remove from the unit:Keep pushingboth sidesnapsholeBundle the cablessnapshooksSet thetip in thehooksTo loosen:Keeppushingthe knobknobInsert the clamperin a hole.AC cord connection and fi xing, cable fi xingWhen using the Wall-hanging bracket (vertical) (for 50 inch model)Note:When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes and to secure the cables. If theclamper is used on the hole , the cables may be caught by the wall-hanging bracket.50 inch model 65 inch modelUsing the clamperSecure any excess cables with clamper as required.Note:One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.If you need more clampers, purchase them from your dealer. (Available from the customer service)How to use the Ferrite coreInstalling the Ferrite corePull back the tabs(in two places)1 .Open theFerrite core2.Route the cablethrough and close3.Fix the Ferrite corewith the cable tie4.Stereo mini plug (M3)PC with DVI-Dvideo outShared with PC IN.Less than5 cmLess than5 cmFerrite core(supplied)DVI-video cable (Within 5 m)