Panasonic TH-47LFT30W Operating Instructions Manual

Also see for TH-47LFT30W: Brochure Specification Brochure Operating instructions Service manual

Contents

Panasonic TH-47LFT30W Operating Instructions Manual Manual pdf 4 page image

4Ŷ Driver Software Operating EnvironmentThe Driver software is supported by both the Japanese and English versions of Windows XP (SP3 or later),Windows XP x64 Edition (SP2 or later), Windows Vista (SP1 or later), Windows Vista x64 Edition (SP2 orlater), Windows 7, and Windows 7 x64 Edition.The following environment is required to correctly install and start up the Driver software.• CPU … Pentium IV or later (2 GHz or faster Celeron or Pentium 4 recommended)• Memory … 512 Mbytes or more• HDD … 150 Mbytes or more available area• Compatible with USB 1.1/2.0 interfaceŶ Driver Software Restrictions• The mouse emulation feature cannot be used on the login window that appears at Windows startup, whenrestoring from the suspended state or when the screen saver is unlocked. The mouse emulation feature isactivated after you log in.• There is no remote wakeup feature that activates the screen from the suspended state by touching thetouch panel.• If your system does not meet the requirements above or the applications use up too much memory, theresponse of the touch panel may slow down.• Only Windows is supported. (Operation is not guaranteed in other environments than the above.)• If using Windows Vista/7 and user account control, the touch panel does not respond to touch whenwindows, such as the Properties window, that require administrator authority to access appear.Ŷ Restrictions on competing drivers• If you try to install a driver from another manufacturer in the same computer in which this Driver softwareis installed or inversely try installing this Driver software in a computer where another driver is alreadyinstalled, the driver may not install properly.In such case, uninstall the current driver and then install the new driver.Also, if a driver from another manufacturer is started up while this Driver software is already running, theerror message “A driver is already running.” may be displayed.In such case, quit both drivers and then start up the driver you want to use.Setup ProcedureConnect the computer to the USB port of the display (P. 7)1 Install the Driver software to your computer (P. 5)Do not connect the USB cable yet.Restart your computer• After restarting your computer, check appears in the task tray.23Calibrate the touch panel (P. 15)This completes the basic setup.4