Panasonic TH-47LFT30W Operating Instructions Manual

Also see for TH-47LFT30W: Brochure Specification Brochure Service manual Operating instructions

Contents

Panasonic TH-47LFT30W Operating Instructions Manual Manual pdf 12 page image

4Safety PrecautionsCAUTIONWhen using the LCD DisplayBe sure to disconnect all cables before moving the Display.• If the Display is moved while some of the cables are still connected, the cables may become damaged, and fire orelectric shock could result.Disconnect the power supply plug from the wall socket as a safety precaution before carrying out anycleaning.• Electric shocks can result if this is not done.Clean the power cable regularly to prevent it becoming dusty.• If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in fire.Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth.Do not burn or breakup batteries.• Batteries must not be exposed to excessive heat such as sunshine, fire or the like.Power supply• Install the product near an electrical outlet so that the plug can be unplugged immediately when an abnormalityoccurs.• For a wall installation, used a power outlet which can be unplugged immediately when an abnormality occurs.• This product is energized when the power plug is inserted to a socket. To cut off the power completely, the powerplug must be unplugged from the socket.Cabinet• Corner part of the metal cabinet is a potential injury hazard.• To lift the product, hold the handles for the precaution of fall. Injury or damage may be caused.Cleaning and maintenanceThe front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaningcloth or a soft, lint-free cloth.• If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or water inwhich neutral detergent has been diluted 100 times, and then wipe it evenly with a dry cloth of the same type untilthe surface is dry.• Do not scratch or hit the surface of the panel with fingernails or other hard objects, otherwise the surface maybecome damaged. Furthermore, avoid contact with volatile substances such as insect sprays, solvents and thinner,otherwise the quality of the surface may be adversely affected.If the cabinet becomes dirty, wipe it with a soft, dry cloth.• If the cabinet is particularly dirty, soak the cloth in water to which a small amount of neutral detergent has beenadded and then wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry cloth.• Do not allow any detergent to come into direct contact with the surface of the Display. If water droplets get insidethe unit, operating problems may result.• Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of thecabinet surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periodsin contact with articles made from rubber or PVC.